A finite segment model for shear lag analysis

A finite segment model is developed to calculate the shear lag effects for box girders with varying depth. Multiple longitudinal displacement functions are used to derive the stiffness matrix and the nodal force vector of the segment element. The shear deformation of the web is taken into consideration. A Perspex glass model of a three-span continuous box girder with varying depth is tested to provide experimental results for verifying the accuracy of the proposed method. The influences of the flange width to span ratio and girder–height ratio upon the shear lag are presented and discussed.     

Sequential inactivation of Cryptosporidium parvum oocysts with chlorine dioxide followed by free chlorine or monochloramine.

The main objective of this study was to assess the effect of temperature (4-30 degrees C) on the inactivation kinetics of Cryptosporidium parvum oocysts with sequential disinfection schemes involving the use of chlorine dioxide as the primary disinfectant and free or combined chlorine as the secondary disinfectant in synthetic water. The synergy previously reported for sequential inactivation of C. parvum oocysts with ozone/free chlorine or ozone/combined chlorine did not occur when chlorine dioxide was used. instead of ozone, as the primary disinfectant within the temperature range (4-30 degrees C) and the pre-treatment levels investigated. Sequential ozone/chlorine dioxide and chlorine dioxide ozone experiments revealed that the lower level or absence of synergy for chlorine dioxide/free chlorine and chlorine dioxide, monochloramine was likely the result of chlorine dioxide reacting with oocyst chemical groups that are mostly different from those reacting with ozone, free chlorine, or monochloramine. The CT concept was found to be valid for the primary inactivation kinetics of C. parvum oocysts with chlorine dioxide, thus allowing the use of the simpler CT approach for the development of C. partum inactivation requirements with chlorine dioxide. General consistency was found between the secondary inactivation kinetics of C. parvum oocysts with free chlorine and monochloramine after chlorine dioxide pretreatment obtained in this study with oocyst viability determined by a modified in vitro excystation method and those reported in the literature for the same sequential disinfection schemes based on an animal infectivity assay.     

Some geotechnical properties of soils in the Haditha area,W. Iraq

The present study is part of the regional engineering geological survey of the western deserts dealing with soil investigations attempting their classification and evaluation for engineering purposes. Field study has revealed that these soils are mainly of residual origin, partly they are colluvial and alluvial. Laboratory test results show that they composed of both coarse and fine fractions. The coarse-grained are mainly of SM-group, less frequently of SC-group. Fine-grained soils are of both CL-and ML groups in equal significance. These soils are seldom free from soluble salts, particularly sulphates in the form of secondary gypsum, some with a high content. Results are discussed in details. Important engineering properties with suitability for engineering use are also given.     

A pilot study to investigate the effects of combined dehumidification and HEPA filtration on dew point and airborne mold spore counts in day care centers

Meteorological factors such as relative humidity directly correlate with airborne fungal levels outdoors and indoors. While dehumidification alone is effective at reducing moisture necessary for mold growth, it is inadequate as a single intervention as it does not remove viable and non-viable fungal spores that are potentially allergenic. The purpose of this pilot study was to investigate whether dehumidification in combination with high-efficiency particulate arrestance (HEPA) filtration is effective at reducing airborne mold spore levels in day care centers. Two day care centers within a 2-mile radius of each other were selected. Day care center A was 2 years old with eight rooms while day care center B was 15 years old with six rooms. A high efficiency Santa Fe dehumidification unit equipped with a HEPA filter was installed in half the rooms (intervention) of each day care facility. Electronic HOBO data loggers continuously measured outdoor and indoor room dew point and temperature every 2 h throughout the study. Dew point and airborne fungal spore measurements from selected rooms with controlled air conditions were analyzed by comparing baseline measurements to those obtained at subsequent time periods over 1 year. Regression models accounted for correlations between measurements in the same room over time. Intervention resulted in a lowered average dew point from baseline by 8.8 degrees C compared with a decrease of 7.1 degrees C in non-intervention rooms across all time periods in both facilities (P<0.001). Fungal analyses demonstrated lower baseline (P=0.06) and follow-up means in intervention rooms (P<0.05), however the change from baseline to end of follow-up differed between intervention and non-intervention rooms in the two facilities. Log transformation was applied to approximate normality of fungal measurements. Dehumidification with HEPA filtration was effective at controlling indoor dew point in both facilities and at reducing airborne culturable fungal spore levels in one of the two facilities. These preliminary results provide a scientific rationale for using this intervention in future studies designed to investigate the impact of indoor mold exposure on health outcomes. PRACTICAL IMPLICATIONS: Poor indoor air quality is a recognized cause or contributing factor to health effects. Dampness and humidity have been linked to upper and lower respiratory symptoms in children and adults. This study indicates that reducing indoor relative humidity and airborne mold spore levels using high-efficiency dehumidification units equipped with HEPA filtration is feasible even in work facilities such as day care centers where traffic in and out of the building is difficult to regulate. Clinicians should emphasize to their patients the importance of dehumidification and HEPA filtration to improve indoor air quality in the home and workplace.     

VOCs and PAHs emissions from creosote-treated wood in a field storage area

In this study, the emissions of volatile organic compounds (VOCs, in this case aromatic hydrocarbons containing one benzene ring and furans) and polycyclic aromatic hydrocarbons (PAHs) from wood recently treated with creosote are examined. The VOCs and PAHs were identified and quantified in the gas phase. Additionally, the PAHs were quantified in the particulate phase. Glass multi-sorbent tubes (Carbotrap, Carbopack X, Carboxen-569) were used to hold the VOCs. The analysis was performed using automatic thermal desorption (ATD) coupled with capillary gas chromatography/mass spectrometry (GC/MS). PAHs vapours were collected on XAD-2 resin, and particulate matter was collected on glass fibre filters. The PAHs were analysed using GC/MS. The main components of the vapours released from the creosote-treated wood were naphthalene, toluene, m+p-xylene, ethylbenzene, o-xylene, isopropylbenzene, benzene and 2-methylnaphthalene. VOCs emission concentrations ranged from 35 mg m(-3) of air on the day of treatment to 5 mg m(-3) eight days later. PAHs emission concentrations ranged from 28 microg m(-3) of air on the day of treatment to 4 microg m(-3) eight days later. The air concentrations of PAHs in particulate matter were composed predominantly of benzo[b+j]fluoranthene, benzo[a]anthracene, chrysene, fluoranthene, benzo[e]pyrene and 1-methylnaphthalene. The emission concentrations of particulate polycyclic aromatic hydrocarbons varied between 0.2 and 43.5 ng m(-3). Finally, the emission factors of VOCs and PAHs were determined.     

Determination of low concentration of sulphorhodamine B in wastewaters and stabilization ponds

The use of sulphorhodamine B, a known red fluorescent dye as a quantitative tracer in hydrological studies related to wastewaters has been proved experimentally. The interference in the accuracy of fluorescence readings owing to dissolved or suspended contaminants in wastewaters, especially at low concentrations of dye, was solved by successive filtering and eluting of the sample through a sep-pack C-18. The sulphorhodamine B, which is concentrated by displacement with small volumes of methanol, was thus retained. Volumes were then read with an fluorescence spectrophotometer. The procedure was demonstrated to be valid for use with sewers, stabilization ponds and wastewaters for concentrations as low as 5 × 10⁻⁷ g litre⁻¹.     

City edges in Germany: Quality growth and urban design

Forty years of explosive growth have dissolved the hard edge of old walled cities throughout Germany. Undefined suburban mess has consumed vast areas of land and degraded picturesque German landscapes. The new interest in strengthening local identities coincides with national priorities to enhance the cultural and natural heritage. Policies for quality growth at the city's edge evolve through a series of steps, including the community's vision statements, comprehensive master planning, environmental prioritization of potential development sites, and land banking for mitigation of future impacts. The merits of high density urban form with strategically placed ‘hard’ and ‘soft’ edges include preservation of landscape with special environmental and scenic value; proximity of residential and recreational areas; convenient and car-free transit; and openness contrasts with urban density.     

A study of the weathering of the bukit timah granite part a: Review,field observations and geophysical survey

The Bukit Timah granite exhibits a full range of weathering grades. Examination of these exposures shows that the weathering has been rapid. Field observations and geophysical surveys show that the rock has been weathered up to 70 meters depth, and that the main mechanisms of weathering is chemical decomposition. The humid tropical condition in Singapore with high annual precipitation has produced secondary weathering of the residual soil. The weathering profiles suggest that the weathering of the Bukit Timah granite is stratified with weathered layers and a sharp boundary between the residual soil and the slightly to moderately weathered granite. This paper (Part A) is a review of current weathering classification systems for weathered rock. Some results from field observations and geophysical surveys are also presented in the paper. A weathering classification and determination method is proposed for the Bukit Timah granite. Results from field and laboratory investigations of the weathering of the granite and material properties will be presented in Part B.